|
11-04-2020, 03:13 PM | #1 |
Jr. Member
Join Date: Oct 2016
Location: Kings mtn NC
Posts: 27
|
2000 Vulcan 1500 ecm
I have a 2000 Vulcan 1500 Nomad g model . The Cdi box is bad and I was wondering what years had the same cdi box ? I have found a few that look the same but I am not sure if they will work . The bike is not fuel injected . Thank you in advance for any information
Login or Register to Remove Ads |
|
11-04-2020, 05:33 PM | #2 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,977
|
Check the microfiche for years with the same part number.
https://www.ronayers.com/oemparts/l/...n1500-l1-parts |
|
11-05-2020, 05:43 AM | #3 |
Join Date: Oct 2013
Location: chandler okla
Posts: 854
|
search the thread posts on the resistor in the ignition switch . the grey ? wire to the ecm has to have a resisted voltage for the ecm to work . several folks bought ecms they did not need . Bud2rat had it happen about 6 years ago look for his posts
Last edited by vulcanscott; 11-05-2020 at 05:46 AM.
|
|
11-05-2020, 10:56 AM | #4 |
Sr. Member
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,358
|
Plain and simple, you will need a box off a carbed bike.....late 90s thru 2000....the 'G' models....
As RedJay suggested.....check your parts #s....
__________________
--------------------- Don't start no schit, there won't be no schit.... *My Sarcasm is directly proportional to the amount of Stupidity involved* --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! |
|