loose Kury pegs

**HwyRider** · 03-31-2015, 02:01 PM

I put a set of Kury floorboard mounts on the bike and have Kury Dually pegs attached to them. I used the double washers that came with them when I mounted the pegs. They still fall down when I'm riding. I have the bolts cranked as tight as I can get them. There's no more room for another washer between the pegs and the mounts. Any ideas on how to tighten these up so that they don't fall down on their own.

03-31-2015, 02:01 PM	#1
HwyRider Join Date: Jun 2013 Location: South Shore, MA Posts: 4,629	loose Kury pegs I put a set of Kury floorboard mounts on the bike and have Kury Dually pegs attached to them. I used the double washers that came with them when I mounted the pegs. They still fall down when I'm riding. I have the bolts cranked as tight as I can get them. There's no more room for another washer between the pegs and the mounts. Any ideas on how to tighten these up so that they don't fall down on their own. __________________ VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium Login or Register to Remove Ads
	0