|
|
![]() |
#1 |
Member
Join Date: Mar 2013
Location: Wilberforce, Ontario Canada
Posts: 455
|
Any suggestion are welcome
I started to change my front tire on my Voyager this afternoon and the front axle would not come loose, yes I removed the 2 bolts below the axle. I tried the suggestion of the 22mm bolt with the double nut but that sucker won't budge, has anyone had this problem and what did they try
![]() Login or Register to Remove Ads |
![]() |
![]() |
#2 |
![]() Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
How big a power bar are you using? I haven't had this issue with the front axle, but when I have a large stubborn bolt or nut and can't use heat, I get out a 1/2 drive 20in power bar and slip a piece of pipe over it for extra leverage. You may want a helper sitting on the bike holding the bars tight. An impact gun may also be a good choice to break it loose.
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
![]() |
![]() |
#3 |
Top Contributor
Join Date: Aug 2007
Location: The VooDoo Lounge
Posts: 5,779
|
Did ya get er dun?
__________________
2012 FLHTK |
![]() |