DYNA BEADS AGAIN

oldbiker · 01-10-2008, 02:10 PM

Got the Dyna Beads today. Installed and did a short test ride. Couldn't go to far. All the rain California and the mid west got finally arrived in Georgia. It took me about 45 minutes to do front and rear. I took the wheel weights off and the bike is smooth as silk up to 80 MPH. Wish I had known about them long ago. NOTE: They tell you if you have 90 degree valve stems you have to take the wheel off. NOT TRUE. The motorcycle kit comes with a plastic dispensing bottle and a short piece of tygon tubing. The tubing goes over the valve stem, after you remove the valve, and you dump a small ammount of beads into the tube. I used a small engraver to vibrate the beads into the tire. Just repeat the process until the 2 oz. of beads are in the tire. You can use any kind of vibrator. I'm sure you can find one around the house .....
somewhere.

blowndodge · 01-10-2008, 03:31 PM

You mean Nico's vibrating butt plug will work too?

ianicky · 01-10-2008, 03:32 PM

Hi oldbiker,

I'm just getting back into the bikes after many years away from them, this might be a stupid question but what is the purpose of these Dyna beads?? ???

Anyway I'm not sure if i can put my hands on a vibrator ::)

oldbiker · 01-10-2008, 03:36 PM

Lets see. Yes Nico's vibrating butt plug will work. Dyna Beads replace wheel weights. They claim to extend tire life and prevent cupping. Go to www.innovativebalancing.com and check it out. They sell a motorcycle kit for for under $13.00

rlfaubion · 01-10-2008, 03:46 PM

I don't know if the dyno beads would be the same size, but I have a friend that puts BB's in his tires on a motorhome.

Todd · 01-10-2008, 03:49 PM

Quote:

You mean Nico's vibrating butt plug will work too?

I'd rather buy new tires every 1000 miles than have to use THAT!!!!!

oldbiker · 01-10-2008, 04:33 PM

Ron, The Dyna Beads are really, really tiny. Not as big as a pin head and they are ceramic. They make absolutley no noise.

blowndodge · 01-10-2008, 05:59 PM

Oldbiker, you know your stuff! thanks for the write up as I'm contemplating using that when I get new tires and keeping the lead weight off the rim. I've not heard one negative comment in years about the beads. Did you say they are not as big as a Nico???

beezer · 01-10-2008, 07:00 PM

Quote:

[quote:2yy13h1w]You mean Nico's vibrating butt plug will work too?

I'd rather buy new tires every 1000 miles than have to use THAT AGAIN!!!!![/quote:2yy13h1w]

beezer · 01-10-2008, 07:01 PM

Quote:

Oldbiker, you know your stuff! thanks for the write up as I'm contemplating using that when I get new tires and keeping the lead weight off the rim. I've not heard one negative comment in years about the beads. Did you say they are not as big as a Nico???

Yup, that's what I heard

michiganmike · 01-10-2008, 07:43 PM

Thanks for your review of the beads. My brother and I are going to get them and positive reports from forum members make me feel confident in using this product.

blowndodge · 01-10-2008, 11:33 PM

so let me get this right Beez. Todd is going to stop using Nico's butt plug and Nico is a pin head?

**trip** · 01-11-2008, 07:37 AM

Quote:

Got the Dyna Beads today. Installed and did a short test ride. Couldn't go to far. All the rain California and the mid west got finally arrived in Georgia. It took me about 45 minutes to do front and rear. I took the wheel weights off and the bike is smooth as silk up to 80 MPH. Wish I had known about them long ago. NOTE: They tell you if you have 90 degree valve stems you have to take the wheel off. NOT TRUE. The motorcycle kit comes with a plastic dispensing bottle and a short piece of tygon tubing. The tubing goes over the valve stem, after you remove the valve, and you dump a small ammount of beads into the tube. I used a small engraver to vibrate the beads into the tire. Just repeat the process until the 2 oz. of beads are in the tire. You can use any kind of vibrator. I'm sure you can find one around the house .....
somewhere.

Thanks for letting us know, oldbiker......I'm thinking about installing dyna beads next time I buy a new set of tires....(even tho Todd is going to stop using Nico's butt plug and Nico is a pin head). Keep us posted on how they are doing...

Trip

Todd · 01-11-2008, 09:45 AM

Quote:

so let me get this right Beez. Todd is going to stop using Nico's butt plug and Nico is a pin head?

yeeeeuuuck.....I threw up again!!! :( :( :(

blowndodge · 01-11-2008, 10:54 AM

all over Nico's lap!!!!

01-10-2008, 02:10 PM	#1
oldbiker Member Join Date: Nov 2007 Location: la Fayette, Ga Posts: 472	DYNA BEADS AGAIN Got the Dyna Beads today. Installed and did a short test ride. Couldn't go to far. All the rain California and the mid west got finally arrived in Georgia. It took me about 45 minutes to do front and rear. I took the wheel weights off and the bike is smooth as silk up to 80 MPH. Wish I had known about them long ago. NOTE: They tell you if you have 90 degree valve stems you have to take the wheel off. NOT TRUE. The motorcycle kit comes with a plastic dispensing bottle and a short piece of tygon tubing. The tubing goes over the valve stem, after you remove the valve, and you dump a small ammount of beads into the tube. I used a small engraver to vibrate the beads into the tire. Just repeat the process until the 2 oz. of beads are in the tire. You can use any kind of vibrator. I'm sure you can find one around the house ..... somewhere. Login or Register to Remove Ads
	0

01-10-2008, 03:31 PM	#2
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	DYNA BEADS AGAIN You mean Nico's vibrating butt plug will work too? __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

01-10-2008, 03:32 PM	#3
ianicky Sr. Member Join Date: Dec 2007 Location: Somerset, England Posts: 1,131	DYNA BEADS AGAIN Hi oldbiker, I'm just getting back into the bikes after many years away from them, this might be a stupid question but what is the purpose of these Dyna beads?? ??? Anyway I'm not sure if i can put my hands on a vibrator ::)
	0

01-10-2008, 03:36 PM	#4
oldbiker Member Join Date: Nov 2007 Location: la Fayette, Ga Posts: 472	DYNA BEADS AGAIN Lets see. Yes Nico's vibrating butt plug will work. Dyna Beads replace wheel weights. They claim to extend tire life and prevent cupping. Go to www.innovativebalancing.com and check it out. They sell a motorcycle kit for for under $13.00
	0

01-10-2008, 03:46 PM	#5
rlfaubion Sr. Member Join Date: Sep 2007 Location: Northern California Posts: 1,582	DYNA BEADS AGAIN I don't know if the dyno beads would be the same size, but I have a friend that puts BB's in his tires on a motorhome. Login or Register to Remove Ads
	0

01-10-2008, 04:33 PM	#7
oldbiker Member Join Date: Nov 2007 Location: la Fayette, Ga Posts: 472	DYNA BEADS AGAIN Ron, The Dyna Beads are really, really tiny. Not as big as a pin head and they are ceramic. They make absolutley no noise.
	0

01-10-2008, 05:59 PM	#8
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	DYNA BEADS AGAIN Oldbiker, you know your stuff! thanks for the write up as I'm contemplating using that when I get new tires and keeping the lead weight off the rim. I've not heard one negative comment in years about the beads. Did you say they are not as big as a Nico??? __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

01-10-2008, 07:43 PM	#11
michiganmike Member Join Date: Oct 2007 Location: Dearborn, Michigan Posts: 100	DYNA BEADS AGAIN Thanks for your review of the beads. My brother and I are going to get them and positive reports from forum members make me feel confident in using this product.
	0

01-10-2008, 11:33 PM	#12
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	DYNA BEADS AGAIN so let me get this right Beez. Todd is going to stop using Nico's butt plug and Nico is a pin head? __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

01-11-2008, 10:54 AM	#15
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	DYNA BEADS AGAIN all over Nico's lap!!!! __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyna Beads - everyone should have them!!	dandantmm	1500 & 1600 Nomad	13	10-07-2010 01:53 AM
Dyna Beads	usranger74	1500 & 1600 Nomad	25	09-27-2010 02:17 PM
Dyna Beads	usranger74	Vulcan Nomad/Vaquero/Voyager	5	09-05-2010 11:03 AM
No more Dyna Beads for me	trip	1500 & 1600 Nomad	75	08-01-2009 01:24 PM
Dyna Beads	trip	1500 & 1600 Nomad	24	03-11-2008 08:45 AM