Wanted pattern for lowers

**ringadingh** · 03-15-2009, 07:37 PM

There was someone here a while ago that had a pattern, but drawing one out yourself is not that hard to do either. Just come up with a size that still looks appealing. Ive seen some that look out of proportion on the bikes.

strobe · 03-15-2009, 07:43 PM

Not sure is this one will do the trick for you, but i found this a long time ago and could not find it again so I am re-posting the page on my site with the pattern download and instructions.

The instructions talk about bending the lower mount a bit, but it should work without doing that, that step is to get the lowers to line up a bit better with the windshield.

http://nomad.nmsolutions.ca/lowers.php

caper · 03-15-2009, 07:50 PM

Thanks for the info :):)

cactusjack · 03-15-2009, 11:28 PM

Quote:

Originally Posted by Ringadingh

There was someone here a while ago that had a pattern, but drawing one out yourself is not that hard to do either. Just come up with a size that still looks appealing. Ive seen some that look out of proportion on the bikes.

Idaho has a pattern he designed that he has been known to share.

radco · 03-16-2009, 05:28 AM

This may help
http://home.insightbb.com/~kpmh.005/N-Lowers.htm Plus I can trace the patern I have, If I cannt find the link,,,,,,,,,,,Rich

caper · 03-16-2009, 08:52 AM

Thanks Rich that will help:)

radco · 03-17-2009, 07:37 PM

Do you want me to trace the template I have.. If I remember right Idaho sent it to me....

caper · 03-17-2009, 08:06 PM

radco .. Thanks very much but I now have a pair :) Thanks, Donnie

superduty · 03-18-2009, 07:49 AM

Another tip for those of you with router tables. I made a template out of 1/4" plywood and then stuck it to the lexan with double-sided tape and routed it on a router table. Use a trim bit with a top bearing and set router on lowest speed. Makes a very nice finish to the edge of the lexan.

k9sarky · 03-18-2009, 08:32 AM

You can e-mail Jack from this Nomad website http://www.thewoodshop.20m.com/motor...m#introduction
and request a lowers pattern. You'll find a link when you scroll down through his First Impressions section.
I started with his pattern and modified it.
There are also some pretty sharp Nomad photos and ideas on the website.

03-15-2009, 07:37 PM	#1
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Wanted pattern for lowers There was someone here a while ago that had a pattern, but drawing one out yourself is not that hard to do either. Just come up with a size that still looks appealing. Ive seen some that look out of proportion on the bikes. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951 Login or Register to Remove Ads
	0

03-15-2009, 07:43 PM	#2
strobe Sr. Member Join Date: Mar 2009 Posts: 1,200	Wanted pattern for lowers Not sure is this one will do the trick for you, but i found this a long time ago and could not find it again so I am re-posting the page on my site with the pattern download and instructions. The instructions talk about bending the lower mount a bit, but it should work without doing that, that step is to get the lowers to line up a bit better with the windshield. http://nomad.nmsolutions.ca/lowers.php __________________ Cory 2013 Honda GL1800 Goldwing 2008 Kawasaki KLR 650 (for sale) 2007 Honda ST1300 (sold) 2005 Kawasaki Nomad (sold) 2004 Suzuki Hayabusa (sold) http://www.strobel.ws VBA #01021 VROC #29389
	0

03-15-2009, 07:50 PM	#3
caper Sr. Member Join Date: Feb 2009 Location: Nova Scotia, Canada Posts: 1,137	Wanted pattern for lowers Thanks for the info :):) __________________ Live in the NOW !
	0

03-16-2009, 05:28 AM	#5
radco Sr. Member Join Date: Oct 2007 Location: Dedham Maine Posts: 4,199	Wanted pattern for lowers This may help http://home.insightbb.com/~kpmh.005/N-Lowers.htm Plus I can trace the patern I have, If I cannt find the link,,,,,,,,,,,Rich __________________ Login or Register to Remove Ads
	0

03-16-2009, 08:52 AM	#6
caper Sr. Member Join Date: Feb 2009 Location: Nova Scotia, Canada Posts: 1,137	Wanted pattern for lowers Thanks Rich that will help:) __________________ Live in the NOW !
	0

03-17-2009, 07:37 PM	#7
radco Sr. Member Join Date: Oct 2007 Location: Dedham Maine Posts: 4,199	Wanted pattern for lowers Do you want me to trace the template I have.. If I remember right Idaho sent it to me.... __________________
	0

03-17-2009, 08:06 PM	#8
caper Sr. Member Join Date: Feb 2009 Location: Nova Scotia, Canada Posts: 1,137	Wanted pattern for lowers radco .. Thanks very much but I now have a pair :) Thanks, Donnie __________________ Live in the NOW !
	0

03-18-2009, 07:49 AM	#9
superduty Member Join Date: Apr 2008 Location: Independence, MO Posts: 259	Wanted pattern for lowers Another tip for those of you with router tables. I made a template out of 1/4" plywood and then stuck it to the lexan with double-sided tape and routed it on a router table. Use a trim bit with a top bearing and set router on lowest speed. Makes a very nice finish to the edge of the lexan.
	0

03-18-2009, 08:32 AM	#10
k9sarky Member Join Date: Jun 2008 Location: Western Kentucky Posts: 167	Wanted pattern for lowers You can e-mail Jack from this Nomad website http://www.thewoodshop.20m.com/motor...m#introduction and request a lowers pattern. You'll find a link when you scroll down through his First Impressions section. I started with his pattern and modified it. There are also some pretty sharp Nomad photos and ideas on the website.
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lowers	recumbentbob	Vulcan Nomad/Vaquero/Voyager	8	06-18-2010 02:27 PM
Wanted - Brackets for lowers	billmac	Wanted	6	06-12-2010 12:26 AM
Darkside Tread Pattern	pappy	Vulcan Nomad/Vaquero/Voyager	8	02-04-2010 10:04 PM
Chrome Lowers?	superduty	Vulcan Nomad/Vaquero/Voyager	7	08-15-2008 07:37 PM
DIY Lowers Pattern	bobzinger	Vulcan Nomad/Vaquero/Voyager	8	10-16-2007 03:35 PM