Batwing Fairing / Factory Lowers

knobber · 08-01-2015, 07:04 AM

After installing my Memphis Shades Batwing fairing I came across the dilemma of what to do with the factory lowers. After considering different ideas, I decided and realized that I could still use the factory windshield brackets. With a Dremel and a cutoff wheel I removed the smaller boss on the inside of the upper mount support. After that all I had to do was get longer bolts to accommodate the additional thickness and installed on the outside of the quick release mounts. Problem solved!

**MAS Tequila** · 08-01-2015, 07:44 AM

I was able to leave my Chuckster's large lowers on untouched with my full fairing.

There isn't one bit of interference.

MT

08-01-2015, 07:04 AM	#1
knobber Member Join Date: Feb 2015 Location: Illinois Posts: 197	Batwing Fairing / Factory Lowers After installing my Memphis Shades Batwing fairing I came across the dilemma of what to do with the factory lowers. After considering different ideas, I decided and realized that I could still use the factory windshield brackets. With a Dremel and a cutoff wheel I removed the smaller boss on the inside of the upper mount support. After that all I had to do was get longer bolts to accommodate the additional thickness and installed on the outside of the quick release mounts. Problem solved! Login or Register to Remove Ads
	0

08-01-2015, 07:44 AM	#2
MAS Tequila Join Date: Jan 2009 Location: Psychiatric Ward FL Posts: 3,429	I was able to leave my Chuckster's large lowers on untouched with my full fairing. There isn't one bit of interference. MT __________________ MT 2016 FLHP Psychiatric Ward FL VBA 936
	0