|
With your tire pointing straight ahead, turn loose of your handlebars, lean your bike a little, if your bars just flop to the side....bearings too loose....
Get your bike lifted so tires are off the ground, bars straight ahead, stand straddle your front tire lift straight up and down really firmly and quickly....if theres any noticeable slope, bearings are probably loose and need to have some grease added....or your sliders have some wear in them.
If all is well on your front end tightness, look at your tire and wheel bearings....
__________________
---------------------
Don't start no schit,
there won't be no schit....
*My Sarcasm is directly proportional
to the amount of Stupidity involved*
---------------------
VBA#03239
VROC#37400
VRA
---------------------
2014 Vaquero
2001 Nomad FI
2003 Street Glide (sold)
1500 Meanie, fresh rebuild (sold)
90s BUBF Bobber (sold)
2001 UltraCycle FatPounder (Sold)
1975 HD ElectraGlide (Sold)
1982 Kawasaki Z1 Chopper (Sold)
Suck It Up & Ride! 
Last edited by DragonLady58; 08-01-2023 at 07:38 PM.
|