Thread: Power Commander
View Single Post
Old 02-18-2018, 08:30 PM   #7
SmittyRoc115   SmittyRoc115 is offline
Jr. Member
 
Join Date: Jul 2012
Posts: 39
Quote:
Originally Posted by Ridefree View Post
I'll do my best at explaining this very simple procedure ... First I would completely disconnect the battery . Then , depending on how handy you are , remove the tank . you can however just lift the tank from the back and propping it up with a piece of wood but believe me removing the tank is a lot easier . Trust me I know !

Now on the power commander you'll see a black ground attached somewhere to the negative battery post ( remove )
Then , there will be another wire ( I think Grey ) that goes to the TPS sensor which is located aprox at the top of the throttle body ( remove )
The last thing is to remove the injector clips . Just do one at a time so you reconnect the proper injector clip to right injector . Once your in there you'll know what I'm talking about .

Last thing I would do is to make sure you cover up or seal any wiring that could be exposed with shrink tubing or silicone . The last thing you want is an electrical issue before you can enjoy Ivans magic .

Hope this helps . Others will chime in also with there expertise as well .


Thanks I’ll be doing it tomorrow.


Sent from my iPhone using Tapatalk
 
Reply With Quote