Vulcan Bagger Forums - View Single Post

**cnc** · 11-16-2013, 05:21 PM

If your saying the bushing is shorter than the stud and or the bottom bolt giving you side to side slop then I see no issue. If your saying the bushing is a greater diameter than the stud, then you need a sleeve to take up the slop.

11-16-2013, 05:21 PM	#2
cnc Join Date: May 2009 Location: Montreal QC Posts: 12,034	If your saying the bushing is shorter than the stud and or the bottom bolt giving you side to side slop then I see no issue. If your saying the bushing is a greater diameter than the stud, then you need a sleeve to take up the slop. __________________ Norm Ward 2008 blue / silver nomad kawanow / VBA #01136
	0