Vulcan Bagger Forums - View Single Post

cliff1600 · 04-04-2011, 05:13 PM

Somehow I stripped the oil plug threads on the oil pan by over tighten don't now what I was thinking. I used locktite and seems to be holding. Is it possible to use a tap and re thread or go to a bigger plug?

04-04-2011, 05:13 PM	#1
cliff1600 Jr. Member Join Date: Feb 2008 Posts: 35	stripped the oil plug Somehow I stripped the oil plug threads on the oil pan by over tighten don't now what I was thinking. I used locktite and seems to be holding. Is it possible to use a tap and re thread or go to a bigger plug? Login or Register to Remove Ads
	0