Gadets web page?
 

Is there a Working GADETS WEB Page -- I checked and cannot find it?


Hoping to locate it as I am looking for ways to jack my Nomad 1600 2008 Model to service Steering Head -- replace Tires front and rear -- I have GADETS Frame that goes under the Motorcycle that is supposed to Help but my Pit Bull Jack will not fit under it?


Thanks

Presumably your Pitbull Jack is fully lowered and if so and it still wont go under the lifting frame then ride the bike onto some pieces of 3/4 plywood under each wheel and try the jack again. Has your bike been lowered ?

Gadets Web Page
 

Thank You for this priceless reincarnation of Gadgets Web Page. Also for tips given.


It is so well organized and just doing a simple search yields exactly what you are looking for.



Again I really appreciate the speedy replies.


I have a single Car Garage with (4) Four Motorcycles and I have to put one outside to get room but it being Winter and snow up here in Canada I will postpone my Nomad 2008 Model 1600 till the Snow passes.



I did Heat my Garage and put my ST1300 2006 Model Police Bike outside this Fall to install Henry's Modified Rear Drive on my Goldwing 2006 Model that gives me 6th Gear ratio and did my Valves for the first time in 232,500 Clicks to find they were only 1 Thousands loose on 10 Valves and a tight 2 Thousands loose on 2 Valves.



Northern Dancer

i use an 8ft scaffold board, to run up on to ,and a 3ft one,t to rest the sidestand on. Without the 3ft, the bike leans over too far, and the jack still wont go under:cheers:

What he said :cheers: