PDA

View Full Version : Electronic Flasher


11-14-2007, 06:40 PM
Anyone have experience installing an electronic flasher on a 2006 Nomad? Can it be done and what would be a brand recommendation.

I do not want to install an "equalizer"..........it will create an artificial load of 2 to 4 amp and I would prefer to use that power on some other toy.

Thanks

dogdoc
11-14-2007, 06:50 PM
Kissan has all those electrical things Ramman, head light mods, brake light flasher, and 4 way flashers. Fairly easy to install. My brother was wanting one of those.

11-14-2007, 07:33 PM
Doc,
Guess I should of been more specific in my question.

The instructions for hard wiring the electronic flasher states "HARD WIRE INSTALLATION INSTRUCTIONS: if your existing flasher relay is a two wire flasher relay (or a three wire with a ground wire), and you have access to it, you can replace it". Sometimes the OEM flashers are buried on a board with other components and are not accessible as a single component to change. I am just wondering if anyone has dug into the circuitry of the 2006 to come up with an answer as to the accessibility of the OEM flasher, before I stick my trusty screwdriver into something I should not be playing with!

Did I just dig myself a deeper hole to crawl out of or did this make any sense?

Thanks

11-15-2007, 10:40 AM
Doc,
Guess I should of been more specific in my question.

The instructions for hard wiring the electronic flasher states "HARD WIRE INSTALLATION INSTRUCTIONS: if your existing flasher relay is a two wire flasher relay (or a three wire with a ground wire), and you have access to it, you can replace it". Sometimes the OEM flashers are buried on a board with other components and are not accessible as a single component to change. I am just wondering if anyone has dug into the circuitry of the 2006 to come up with an answer as to the accessibility of the OEM flasher, before I stick my trusty screwdriver into something I should not be playing with!

Did I just dig myself a deeper hole to crawl out of or did this make any sense?

Thanks


Makes sense Ram...... BD should have an answer for you shortly!

blowndodge
11-15-2007, 10:41 AM
Sue gets her OWN thread

11-15-2007, 10:44 AM
Sue gets her OWN thread


<marquee>http://i215.photobucket.com/albums/cc206/lulu_belle_xso/spitcoffee.gif</marquee>

socwkbiker
11-15-2007, 10:45 AM
Sue gets her OWN thread

http://farm3.static.flickr.com/2243/2034608566_fc1ec1e658_o.jpg

ringadingh
11-15-2007, 12:51 PM
Im pretty sure Gadgets sight has a thread on installing a 4 way flasher, give it a look.

spirello
11-15-2007, 03:49 PM
GADGETS WEBSITE HAS IT ON THERE, VERY DETAILED. I PUT IT ON MINE COST ME ABOUT 12 BUCK. PUT ALL THE STUFF BEHIND LEFT COVER AND A WEATHERPROOF SWITH ON THE OUTSIDE OF COVER WORKS SLICK. PRETTY EASY TO WIRE IN. GOOD LUCK TO YOU.

dogdoc
11-15-2007, 09:23 PM
Nico you are knocking me out with thos detailed requests,LOLOLOLOL