Flasher Relay VV

[Vet]

Is there a plug n play flasher unit to prevent hyper flashing of led turn signals ? The quick flashing bugs me.I got one for my z900 on flea bay for $9

[MrMikey]

I adapted a LED flasher on my Nomad but I lost the self cancelling feature since it was an integrated unit...........Mike

[VulcanE]

The easiest fix, if you want to retain the self-cancelling feature, is to install load equalizers. You'll need one for each bulb.
something like these..............


https://www.ebay.com/itm/4x-50W-6-ohm-Load-Resistor-For-Fix-LED-Bulb-Fast-Hyper-Flash-Turn-Signal-Blinker/263429789230?hash=item3d55a3962e

[Vet]

Thankyou , I’m on it

[BonVoyager]

The easiest fix, if you want to retain the self-cancelling feature, is to install load equalizers. You'll need one for each bulb.
something like these..............


https://www.ebay.com/itm/4x-50W-6-ohm-Load-Resistor-For-Fix-LED-Bulb-Fast-Hyper-Flash-Turn-Signal-Blinker/263429789230?hash=item3d55a3962e

You don’t need one for each turn signal.

If you have LED’s front and rear, just put one 50w load equalizer per side anywhere in the system for that side. So, instead of putting four 25w load equalizers, one for the front and one for the rear per side, you only need two 50w load equalizers, one for each side.

[smokier]

You don’t need one for each turn signal.

If you have LED’s front and rear, just put one 50w load equalizer per side anywhere in the system for that side. So, instead of putting four 25w load equalizers, one for the front and one for the rear per side, you only need two 50w load equalizers, one for each side.

What BonV said...
Here is the load equalizer with the extra lead going to the tight turn signal. Mounted to the back of the spot light fill plate.

[Lumberjack]

or buy Custom Dynamics universal relay (not load equalizer) or wire a trailer wire isolator and hook LEDs to that. Much better than load equalizers IMO