Phatt II vs Aeromach Risers

[rooster1]

Any suggestions as to which risers are preferred for me . Iam 5ft 10 in with a 34 sleeve length. Riding a 05 nomad 1600. Thanks. Rooster1

[aj]

Hi Rooster1, Im in the same predicamnt as you, want to make a change but not sure which way to go. It will be interesting to see what people think. Must admit I'm leaning to the Aero's

[markusmaximus]

Can't help with your riser question, rooster1, as I have Chuckster riser extensions. But just wanted to say I like the paint job on you Nad (Nomad, that is).

[aj]

Markus Maximus, how much of a difference did the chucksters make? how much improvement up and back? and did you have any problems with cables/shield/etc

[ruruson1]

Well guys, I'm 5'10" and I have the Areomach risers. they are very comfortable and allow me to rest aginst my back rest.

[jussmatt]

Hey Rooster.... I'm sure there will be a lot of posts, but I've got the Phat II's and love them. I'm 6'1" and 35" sleve.... I prefered to have the bars not only up, but back also. I used the center mounts for the risers and have no problems with cables or clearence. Love them and very glad I got them.....works great with the grasshopper back rest.... makes all day riding a breeze!!!

[misunderstood]

I'm 6'1" with 36-37 sleeves and have the aeromachs and love the slouching position it gives as well as the looks of them. http://s2.images.proboards.com/grin.gif

[aj]

Aero's it is! Cheers

[dbone]

I put on the Phat II riser yesterday with alittle help from the wife. Went on very easy with no problems and simple directions. I used the offset holes and the new bolts everything clears just fine. Front brake line is alittle tight. i'm 5'9 with avg. length arms. Only rode around 75 miles and they are great very comfortable. Also, very good finish

02 1500

[misunderstood]

Aero's it is! Cheers

If you can get them, you won't be disappointed. Had a set on my boulevard before the Nomad.

[blowndodge]

I think Todd and SWB are phat 2...

[Todd]

I think Todd and SWB are phat 2...

yeah, but you have a center and an offset hole,,,,,,,and you use them both http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif http://s2.images.proboards.com/tongue.gif

[woodga]

Hi all, I'm new to this forum, and this is my first post. I pondered this question a long time and have ended up going with the Phatt II risers. The main reason? I contacted Aeromach last weekend to place an order, and the risers are on back order 10-12 weeks. This was after already waiting 3 months for Aeromach to restock the e-bay store of smith brothers oneonta.

Hopefully, risers will go on the bike next weekend, then I'll post again.

Good luck to you! http://s2.images.proboards.com/cool.gif

[jussmatt]

Welcome aboard Woodga!! You won't be sorry w/ the Phat II's!!

[tomk]

Welcome aboard Woodga!! You won't be sorry w/ the Phat II's!!

+1