ringadingh
06-17-2012, 08:25 PM
If you want to try to make your own washers, here are the specs. I made then from a snowmobile driven clutch shim, it was already very close to the size required. I had to file out the center hole a little and sand it a little thinner. These shims come in different thicknesses,and any snowmobile or ATV dealer should have them.
1 pc 2.540 OD X 1.790 ID x .0365 thickness
1 pc 2.540 OD X 1.890 ID x .0365 thickness
1 pc 2.540 OD X 1.790 ID x .0365 thickness
1 pc 2.540 OD X 1.890 ID x .0365 thickness