Personalized license plates [Archive]

Jared

06-16-2011, 05:46 PM

I am considering a personalized license plate on my new Nomad and have check Utah DMV site for availability. My first pick (NOMAD) was already taken, so now I'm just kind of considering a few other ideas.

Any good ideas? I only have 5 digits.

Hacksaw

06-16-2011, 05:59 PM

WICKD

Dave

06-16-2011, 06:00 PM

HDCPY

WANAB

3MTA3

JAPHD

cactusjack

06-16-2011, 06:25 PM

There actually was a car with the plate "3MTA3" in Utah back in the 80's. I used to see it near where I worked. It had a plate frame that said "read it backwards".

Loafer

06-16-2011, 07:00 PM

HAPPY.....CRUZN.....LOONY.....K-NOW.....TRAVL.....CUL8R.....XCLR8

AlabamaNomadRider

06-16-2011, 07:16 PM

Neat Scott. I guess I will have to start reading some of them backwards as they don't make sense to me.

Here in Alabama I am not sure we have the option on motorcycle license plates. We do for automobiles but have never seen one on a motorcycle.

anchornomad

06-16-2011, 08:53 PM

NOMAD ( DAMON ) Backwards ? KANOW JARED UTAH1 1UTAH OREM1 AWESM Some to consider Jared. Good Luck. Den

rickyboy

06-16-2011, 08:58 PM

Good luck Jared. I think VN 16,

any suggestions for ol' rickyboy???
6 digits/spaces I think

Loafer

06-17-2011, 05:53 AM

SPOCK

04kaw1500

06-17-2011, 08:30 AM

I have one on my bike that says MYTIME .So when it's my time the EMT'S can say it must of been his time.

jandreu

06-17-2011, 10:35 AM

How about F'NA....When someone ask's if it's your bike just reply F--K'n A it is!

ringadingh

06-17-2011, 06:20 PM

I don't have any ideas on one but none of the mentioned do much for me either.

gghost

06-18-2011, 06:41 PM

Sorry, I had 7 I could use (07NOMAD)so I never tried to shorten it. Perhaps RBRNR?

wompus

06-18-2011, 06:45 PM

K Now

rickyboy

06-18-2011, 09:37 PM

Sorry, I had 7 I could use (07NOMAD)so I never tried to shorten it. Perhaps RBRNR?

????????????? ???

ponch

06-18-2011, 09:43 PM

K Now

or KNOW.

Or how about just "K".

I've been thinking about 7mary4 or 7M4.

trip

06-19-2011, 08:56 AM

In Texas, we have six characters... so I would try MOOVIT.... but since you have only 5 chars... how about.....MUVIT

jesse

06-19-2011, 09:27 AM

4SALE

You could transfer it to your new fixer upper.

jmorrow

06-19-2011, 09:55 AM

NAD#2, or NAD08

billyray

06-19-2011, 06:19 PM

Mine is one that can be read and understood. Plain, simple and to the point. HOBBY

petenomad

06-19-2011, 08:16 PM

Is N0MAD taken (zero instead of O)?

Jared

06-20-2011, 11:14 AM

Is N0MAD taken (zero instead of O)?

Yes it is. :(

Jared

06-20-2011, 11:15 AM

NAD#2

This would actually be Nomad #3

Jared

06-20-2011, 11:16 AM

4SALE

You could transfer it to your new fixer upper.

I hope not too sell this one any time too soon.... It's definitely the nicest Nomad I've done up yet.

Jared

06-20-2011, 11:19 AM

Sorry, I had 7 I could use (07NOMAD)so I never tried to shorten it. Perhaps RBRNR?

????????????? ???

I see rubber burner? Not too sure if I'm correct...

Top Cat

06-20-2011, 02:06 PM

I would use "TC" http://s2.images.proboards.com/grin.gif

ponch

06-20-2011, 02:28 PM

How about OCRSH for Orange Crush. That's what your old bike reminds me of. It's a shame they only allow 5 characters.

gghost

06-20-2011, 11:11 PM

Jared...That is Rice Burner. http://s2.images.proboards.com/grin.gif

How about "OJ"

blowndodge

06-20-2011, 11:48 PM

There actually was a car with the plate "3MTA3" in Utah back in the 80's. I used to see it near where I worked. It had a plate frame that said "read it backwards".

Scott's says "pnisnv"... http://s2.images.proboards.com/shocked.gif ;)

ponch

06-21-2011, 12:00 AM

There actually was a car with the plate "3MTA3" in Utah back in the 80's. I used to see it near where I worked. It had a plate frame that said "read it backwards".

Scott's says "pnisnv"... http://s2.images.proboards.com/shocked.gif ;)

At least it's not 710 77345

Kawhead

06-21-2011, 12:35 AM

KAWHEAD is done been took in North Carolina. I guess I was lucky and got it the first time. Go figure. ::)

You got my blessing if you want to use it in Utah. http://s2.images.proboards.com/cheesy.gif http://s2.images.proboards.com/grin.gif

Todd

06-21-2011, 02:13 PM

KAWHEAD is done been took in North Carolina. I guess I was lucky and got it the first time. Go figure. ::)

You got my blessing if you want to use it in Utah. http://s2.images.proboards.com/cheesy.gif http://s2.images.proboards.com/grin.gif

KAWANOW has now been taken in NC !! Should be ready in a few weeks http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif

http://i208.photobucket.com/albums/bb50/toddf1_2007/DrawPlate.jpg

Jared

06-22-2011, 10:57 AM

I just got back from the DMV. The first person told me 5 letters, but today they said only 4!!!???

With only four, not too sure it's worth the extra $65....? Kinda of lame that it is only 4 letters. A standard plate has 5. I pointed that out and they said the machine they use to make the custome plates uses larger letters....

ponch

06-22-2011, 11:06 AM

I just got back from the DMV. The first person told me 5 letters, but today they said only 4!!!???

With only four, not too sure it's worth the extra $65....? Kinda of lame that it is only 4 letters. A standard plate has 5. I pointed that out and they said the machine they use to make the custome plates uses larger letters....

I would have asked, how about F U? 4 characters is nuts.

Todd

06-22-2011, 12:05 PM

I just got back from the DMV. The first person told me 5 letters, but today they said only 4!!!???

With only four, not too sure it's worth the extra $65....? Kinda of lame that it is only 4 letters. A standard plate has 5. I pointed that out and they said the machine they use to make the custome plates uses larger letters....

WOW $65...ours is $30.............

ponch

06-22-2011, 12:23 PM

[quote="Utah Motorcyclist":hayug0qr]I just got back from the DMV. The first person told me 5 letters, but today they said only 4!!!???

With only four, not too sure it's worth the extra $65....? Kinda of lame that it is only 4 letters. A standard plate has 5. I pointed that out and they said the machine they use to make the custome plates uses larger letters....

ours is $25 and I get 6 characters.

WOW $65...ours is $30.............[/quote:hayug0qr]

Jared

06-22-2011, 02:05 PM

Well the $65 wasn't a huge issue until they said only 4 letters. Not too many choices with that. I guess it's a standard plate for me.

It is $65 one time and an additional $10 each year when you get your new sticker....?

ponch

06-22-2011, 02:15 PM

Well the $65 wasn't a huge issue until they said only 4 letters. Not too many choices with that. I guess it's a standard plate for me.

It is $65 one time and an additional $10 each year when you get your new sticker....?

$25 here and $5 for the sticker.

blowndodge

06-22-2011, 02:32 PM

Getting personalized plates is sooooo...... "Chickie" http://s2.images.proboards.com/grin.gif

gghost

06-22-2011, 04:00 PM

Especially when you have to iron them...right BD.

Kawhead

06-24-2011, 02:22 PM

Well the $65 wasn't a huge issue until they said only 4 letters. Not too many choices with that. I guess it's a standard plate for me.

It is $65 one time and an additional $10 each year when you get your new sticker....? I wonder if you go back now will it be 3 letters and $85. http://s2.images.proboards.com/grin.gif

65 is steep. Git KAW before someone else beats you to it.

Juss Sayin' http://s2.images.proboards.com/cheesy.gif