New to the forum

[chuckster131]

Hi gang! New to this forum, I do post on VROC and Delphi. Was contacted by another member to come aboard here as I make parts for our Kawasaki's. Things I do are handlebar risers and also Larger Lowers for the Nomads, as well as handlebar risers for Suzuki Volusia C50/C90 and LC1500. Check my sig line for pics and email me for more info.

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/

Welcome Chuckster. I think you'll love it here.

[Todd]

Welcome chuckster.....beers in the cooler over there....the hard stuff you gotta pour yourself lately....SWB is falling down on the job!! http://s2.images.proboards.com/angry.gif:(" title=">:(" border="0"/> http://s2.images.proboards.com/angry.gif:(" title=">:(" border="0"/> http://s2.images.proboards.com/angry.gif:(" title=">:(" border="0"/>

Pull up your hip waders and jump on in!!!

[ponch]

This is the mighty Chuckster I recommended for the risers. Good stuff.



Hi gang! New to this forum, I do post on VROC and Delphi. Was contacted by another member to come aboard here as I make parts for our Kawasaki's. Things I do are handlebar risers and also Larger Lowers for the Nomads, as well as handlebar risers for Suzuki Volusia C50/C90 and LC1500. Check my sig line for pics and email me for more info.

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/

[basco]

hey new guy one rule here
members get discounts on larger lowers http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif

[Todd]

hey new guy one rule here
members get discounts on larger lowers http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif

I thought members got discounts on EVERYTHING!!!

[chuckster131]

Discounts ?? We will see what we can do.. http://s2.images.proboards.com/grin.gif

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/

[chuckster131]

Ponch,
Thanks for the plug! I appriciate that very much..

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/


This is the mighty Chuckster I recommended for the risers. Good stuff.



[quote:pq8kdm56]Hi gang! New to this forum, I do post on VROC and Delphi. Was contacted by another member to come aboard here as I make parts for our Kawasaki's. Things I do are handlebar risers and also Larger Lowers for the Nomads, as well as handlebar risers for Suzuki Volusia C50/C90 and LC1500. Check my sig line for pics and email me for more info.

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/[/quote:pq8kdm56]

[socwkbiker]

Welcome chuckster! Grab yourself a cold one or have one of my "you ain't ridding tonight" margaritas.

Hi Chuckster!

[chuckster131]

Is there something for when I post a message, I can select a box to check so I know when someone replies to a topic I create?

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/

Unfortunately not... you can flag topics, but it won't e-mail notify you. You can have your personal messages set to have a pop-up notification when you log on,,, :)

[trip]

Did SocwkBiker say, Marnagrita's (not mispelled, it's the way I pronounce it after 7 of 'em).

Welcome to the KawaNOW forum Chuckster. Make yourself at home.....225 others have and we've been having fun.

Trip

[scion0]

Discounts ?? We will see what we can do.. http://s2.images.proboards.com/grin.gif

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/

Now we're talking. Just bought a new Nomad last Thursday, thinking of putting risers on it but not sure what I need. Seems like a couple inches would do it (yeah, yeah, I know... that is what she said...) but not sure what the various types are out there... the ones I saw were like 180 bucks!! That's just crazy talk http://s2.images.proboards.com/grin.gif Any recommendations?

[Todd]

1st rule of motorcycle accessories.....

<marquee>IF IT SHINES, IT AIN'T CHEAP!!!!!!!</marquee>

http://www.gadgetjq.com/newbie.htm

All kinds of good stuff here for Nomads.

Nico

[Todd]

2nd rule of motorcycle accessories,

<marquee>IF ITS A MOTORCYCLE ACCESSORY, IT AIN'T CHEAP!!!!</marquee>

[blowndodge]

Welcome Chuckster! How bout posting a picture on your bike when you get the chance http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif

[lw]

Welcome aboard Chuckster.

Negative on the e-mail notification for replies, but (similar to VROC boards) when you log in and open the general board you will see a blue "New" icon next to any thread title where there has been activity since you last opened that thread. Click that icon and it will take you directly to the new entries.

Welcome chuckster, Hey my lowers look pretty close to what you have. Very nice!!!! By the way how much for your risers $$?? and how much does it raise your bars by in inches? Again welcome to a great board.... looking forward in talking with ya.

[beezer]

Welcome from Pa

[chuckster131]

Yes those lowers look about like the ones I machine. For the risers I make different length's but the most common are the 2" one's. They riase the bars up 1 7/8" and back about 1 1/4", making the bike more comfortable to ride. Price for the 2" is 46.00 shipped.

Joe (Chuckster 1) Norris
V 14607
01 Nomad, His
01 800 Classic, Hers
Jackson, Michigan

http://www.flickr.com/photos/chuckster1/sets/


Welcome chuckster, Hey my lowers look pretty close to what you have. Very nice!!!! By the way how much for your risers $$?? and how much does it raise your bars by in inches? Again welcome to a great board.... looking forward in talking with ya.

[dogdoc]

The Phat ll are the only ones you want for the Nomad. 3 inches up and 2 back. Weigh 1.6 lbs billet aluminum and beautifully chromed. $135 from Scootworks. Just put mine on about 4-5 days ago. Kooooool. Hey Chuckster where did you get your larger lowers? is that a Cobra light bar? I have a '05 w/Cobra lightbar and nobody makes lowers yet to fit. get back with me on them, please. For now, welcome and get a cold one for yourself and me.

Doc

[chuckster131]

Can you tell me how to post a pic?


Welcome Chuckster! How bout posting a picture on your bike when you get the chance http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif

[chuckster131]

I have the Fire&Steel lightbar on my 01', but I do make the larger lowers for the 05 to 07 also. I will send you a pic of that set up..


The Phat ll are the only ones you want for the Nomad. 3 inches up and 2 back. Weigh 1.6 lbs billet aluminum and beautifully chromed. $135 from Scootworks. Just put mine on about 4-5 days ago. Kooooool. Hey Chuckster where did you get your larger lowers? is that a Cobra light bar? I have a '05 w/Cobra lightbar and nobody makes lowers yet to fit. get back with me on them, please. For now, welcome and get a cold one for yourself and me.

Doc

Man thats the size i have been looking for, freaking sweet chuckster. I didnt want to buy any of the others becasue they all sat to far up and back. I have pretty long arms now and I seem to fit my nad well but I know that if i order a set of the 2" risers that it would be dead perfect. So how can I order these from you ASAP Chuckster???

I look forward to your reply,
Chuck (Vulcancouple)


[quote author=chuckster131 board=general thread=1188867867 post=1188947815]Yes those lowers look about like the ones I machine. For the risers I make different length's but the most common are the 2" one's. They riase the bars up 1 7/8" and back about 1 1/4", making the bike more comfortable to ride. Price for the 2" is 46.00 shipped.

Joe (Chuckster 1) Norris

It's kinda a bummer but you have to use a third party pic provider like webshots, photobucket and link your images here. I wish they gave each one of us like 2MB of space to load images into but they dont. Sorry. Hope this helps chuckster...



Can you tell me how to post a pic?


[quote:9ra53b3f]Welcome Chuckster! How bout posting a picture on your bike when you get the chance http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif http://s2.images.proboards.com/grin.gif[/quote:9ra53b3f]

[scion0]

Man thats the size i have been looking for, freaking sweet chuckster. I didnt want to buy any of the others becasue they all sat to far up and back. I have pretty long arms now and I seem to fit my nad well but I know that if i order a set of the 2" risers that it would be dead perfect. So how can I order these from you ASAP Chuckster???

I look forward to your reply,
Chuck (Vulcancouple)


Now, I'd like to see a pic... and consider getting some... !!! http://s2.images.proboards.com/cool.gif

[quote author=chuckster131 board=general thread=1188867867 post=1188947815]Yes those lowers look about like the ones I machine. For the risers I make different length's but the most common are the 2" one's. They riase the bars up 1 7/8" and back about 1 1/4", making the bike more comfortable to ride. Price for the 2" is 46.00 shipped.

Joe (Chuckster 1) Norris

[scion0]

[quote:7zrpirds]Man thats the size i have been looking for, freaking sweet chuckster. I didnt want to buy any of the others becasue they all sat to far up and back. I have pretty long arms now and I seem to fit my nad well but I know that if i order a set of the 2" risers that it would be dead perfect. So how can I order these from you ASAP Chuckster???

I look forward to your reply,
Chuck (Vulcancouple)


Now, I'd like to see a pic... and consider getting some... !!! http://s2.images.proboards.com/cool.gif

[quote author=chuckster131 board=general thread=1188867867 post=1188947815]Yes those lowers look about like the ones I machine. For the risers I make different length's but the most common are the 2" one's. They riase the bars up 1 7/8" and back about 1 1/4", making the bike more comfortable to ride. Price for the 2" is 46.00 shipped.

Joe (Chuckster 1) Norris [/quote:7zrpirds]


Opps, my comment went inside of his... ::) http://s2.images.proboards.com/grin.gif ;) :)

Now, I'd like to see a pic... and consider getting some... !!!

[trevwales]

Hi chuck, got the items that you sent over here to Wales! Amazing value! Many thanks, Trev

[scion0]

Man thats the size i have been looking for, freaking sweet chuckster. I didnt want to buy any of the others becasue they all sat to far up and back. I have pretty long arms now and I seem to fit my nad well but I know that if i order a set of the 2" risers that it would be dead perfect. So how can I order these from you ASAP Chuckster???

I look forward to your reply,
Chuck (Vulcancouple)

Hey there, any links to any sites to show your stuff? I'd like to see the lowers.

Thanks
[quote author=chuckster131 board=general thread=1188867867 post=1188947815]Yes those lowers look about like the ones I machine. For the risers I make different length's but the most common are the 2" one's. They riase the bars up 1 7/8" and back about 1 1/4", making the bike more comfortable to ride. Price for the 2" is 46.00 shipped.

Joe (Chuckster 1) Norris