CHROMED PEDALS

[flightdoc]

Has anyone switched out the stock pedals for chromed units?
If so which brand and pro's and cons please

thanks

vin

[misunderstood]

Good question. I'm interested in response as well.

I have no pedals, only a motor.I must be missing something again.

[rlfaubion]

Pedals?

[stambukj]

Thats a good question.

Hey Vin, I just ordered this pedal to replace the one on the bike. It should get here in a couple weeks I'll let you know and post pic.
http://www.cruisercustomizing.com/detail.cfm?Category_ID=58&manufacturer_ID=16&product_ID=8633&model_ID=102

Duh me, now I know,and I do have a pedal.

[misunderstood]

But your missing something.................... : )

LOL,but I am not about to quit looking.

[flightdoc]

thanks cookie. That's one of the "PEDALS" I was looking at........ie: brake pedal / shift pedal. Just to be clear!!

[ringadingh]

Ive been considering replacing my rubber tips with those peddle accesories. I should get on the ball and order them.

[Scoot]

Has anyone switched out the stock pedals for chromed units?
If so which brand and pro's and cons please

thanks

vin


Yea Vin I have changed all mine out to Küryakyn, Heel/toe and Brake. To me it just looks better. I even have changed out the floor board mounts to chrome driver and passanger.

Only con about it is the COST. But it does look Great

[ringadingh]

I would like to get chrome or stainless floorboard inserts for the stock floorboards, ones that would fit in between the rubber grooves, but I don't know if there is anything like that available. It would probably be a lot cheaper than replacing the complete floorboards.

[Top Cat]

Hey Vin, I just ordered this pedal to replace the one on the bike. It should get here in a couple weeks I'll let you know and post pic.
http://www.cruisercustomizing.com/detail.cfm?Category_ID=58&manufacturer_ID=16&product_ID=8633&model_ID=102
Just so others reading this know. Those don't REPLACE the petal. They COVER the same petal. ;)

[quote:e5qq9za8]Hey Vin, I just ordered this pedal to replace the one on the bike. It should get here in a couple weeks I'll let you know and post pic.
http://www.cruisercustomizing.com/detail.cfm?Category_ID=58&manufacturer_ID=16&product_ID=8633&model_ID=102
Just so others reading this know. Those don't REPLACE the petal. They COVER the same petal. ;)[/quote:e5qq9za8]

Yes there are small modification when you put them on, the break pedal requires you to drill a hole in the exsisting one

[ringadingh]

OK, thanks for making that clear, I would have thought you replaced the whole peice.

[flightdoc]

seems it would look better if you did replace the whole pedal.can you guys show soom pic's of the pedals you used?
that would be awesome.

thanks

[Scoot]

seems it would look better if you did replace the whole pedal.can you guys show soom pic's of the pedals you used?
that would be awesome.

thanks

http://www.cruisercustomizing.com/images/ky-8027_150.jpg
Don't have this one...wanted something alittle smaller to give my right foot more room..Added the #8044..it's alittle smaller and is 25% longer than the 8029 that I use for my rear shifter
http://www.cruisercustomizing.com/images/4025-honda_150.jpg#8029

toe shifterhttp://www.cruisercustomizing.com/images/ky-8851_150.jpg

[davidjones1]

I have done the same as scoot the adds only took about 20min are so, just make sure to use lock tight they do add a great look to the bike.
ride safe

[flightdoc]

thanks guys. appreciate all the info

[watchman]

I have the three that Scoot showed pictures of. You have to drill a hole for the heel shifter.

[spirello]

ALL KURYAKN FLOORBOARD COVER HEEL TOE BRAKE. YOU CAN SEE IT IN MY PICT. REALLY EASY TO INSTALL. LOOKS WAY BETTER

[dogdoc]

+1

[radco]

OK, thanks for making that clear, I would have thought you replaced the whole peice.
I have the same as Scoot..easy on easy off.. If you need a longer Break pedal Like me(34") you can use the DRIFTER Break Pedal.. about 1 1/2" longer.. and Its Chrome :) Thats my 2 cents..Rich http://s2.images.proboards.com/grin.gif

[callman]

I've got the brake pedal and toe shifter as Scoot shows, very easy install and look great. My only complaint id the set screw on the toe shifter cover is a bit small but would probably stay put without it anyway.